HOME > Product > Project > FRP composite molding

FRP Composite Infusion
From ordinary FRP products to mockup and prototype products, we are in charge of the task of infusion(production) which range from the master model and molding to final products.
Press of Progress
1. Consultants & Receipt ㆍRequest for quotation (Receipt for plans), on the website
ㆍConfirmation of usage & Risk Analysis
2. Quotations ㆍEstimate costs of infusion products materials and workers per workdays
ㆍDiscussion of post-treatment (movement, installation, finishing etc, controlling of details)
3. Orders ㆍDiscussion of prices (including Payment terms & Conditions) and work schedule
4. Production ㆍProduction of master model processing and molding
ㆍProduction after determination of infusion methods favorable to products molding
ㆍConfirmation of the quality
5. Delivery ㆍ● Forwarding following confirmation of products quantity
ㆍThe main procedure for infusion process to be presented as below.
The Major Infusion Progressing

Design >

ㆍReceipt for concept and design
ㆍDrawing a mold article
ㆍStructure analyzing and calculation of costs
ㆍWork initiatives/scheme/planning

Process >

ㆍProcessing for master model
ㆍProduction for molding

Infusion >

ㆍProduction for infusion goods
ㆍCompletion

Final steps >

ㆍMovement for products
ㆍInstallation of products
ㆍFinishing (the project)
a) Design
Once the project begins, we decide several conditions which are considered the most effective ways through a conjunct task with clients, those are as below.

1. Considering of possibilities and suitability related to the production
2. Planning of work schedule
3. Calculation of costs and budget related to the production

We will mediate above-mentioned with close cooperation, in order to go on smoothly for the project; budget, schedule, design, infusion, installation and so forth all matters are thoroughly examined and initiatives will be forward.
b) Processing
The product design has completed, and preparing steps for products infusion are begun. To come up with the infusion, a frame of patterns as same as the product (it would be opposite figuration) is required, and produced at this stage.
1. Master model; Processing for drawing of design as ‘Positive or Negative’ ways depends on patterns.
2. Mold; intermediate workpiece in order to produce final product
c) Infusion
For the product infusion, the infusion tasks progress by utilising molds. According to conditions such as product sizes, forms(flexural extent), surface conditions of final products, request hardness etc, the project will be progressed after deciding infusion methods and composite materials,
For instance, a molded article which requires lightness and hardness is commenced basis with vacuum or autoclaves infusion, and it is selected core materials to reinforce hardness of articles.
These methods are used to form the products that meet properties and customer requirement.
d) Completion
When the products infusion is completed, it is embarked assembling / installation task and it move to the place where it should be placed.
Prior to this, to avoid damages products are should be moved taking products size into account. Next, visited field in advance and supplementation work which is to understand preparing conditions of work sites so that it has no difficulties would be implemented.