SEPOONG POLYMER Co.,LTD

Workable resin

HOME > Modeling Tooling Materials > Workable resin

SW150-NGR/NWH

Characteristics

Excellent form machining
Excellent anti-sagging resistance when lamination high-thickness
Low exothermic A+B components epoxy paste resin
Outstanding shrinkage rate resistance, room temperature curing type
Hand lay-up resin (Normal curing or Fast curing)
A+B components type

Properties

Color	Brown, White
Density(Tolerance)	1.0-1.03(±0.01)
Hardness(Tolerance)	73(±2)
Tg(℃)	-
Tensile Strength(㎫)	19
Flexural Strength(㎫)	58

Applications

Checking fixture for press
Checking fixture for injection

SW200-NOR/NWH

Characteristics

Hand layup rein for low density
Excellent anti-sagging resistance when lamination high-thickness
Workable resin for automobile master modeling
Excellent low-hardness, NC machining
A+B components type (Normal curing or Fast curing)

Properties

Color	Orange, White
Density(Tolerance)	0.63(±0.02)
Hardness(Tolerance)	65(±)
Tg(℃)	-
Tensile Strength(㎫)	17
Flexural Strength(㎫)	49

Applications

Interior / exterior design

SW250-NBR

Characteristics

Medium density A/B components type resin
Hand lay-up rein for wooden patterns
Easy mixable putty
Improved abrasion-resistance for end-mill during machining
A+B components type (Normal curing or Fast curing)

Properties

Color	Brown
Density(Tolerance)	0.77(±0.02)
Hardness(Tolerance)	64(±2)
Tg(℃)	-
Tensile Strength(㎫)	17
Flexural Strength(㎫)	49

Applications

Interior / exterior design

SW300-NBR

Characteristics

Manual lay-up resin for low density
Excellent adhesion to substrate
Easy mixable putty
Reduction of hand work time
Excellent NC machining / low dust emissions
A+B components type

Properties

Color	Brown
Density(Tolerance)	0.61(±0.01)
Hardness(Tolerance)	63(±3)
Tg(℃)	-
Tensile Strength(㎫)	-
Flexural Strength(㎫)	-

Applications

Interior / Exterior design
Export Only

SW325-NBR

Characteristics

Hand lay-up for Wind blades
Good adhesion for various substrates
Easy mixable putty
Reduction for hand work time
Extended tools life due to improvement for abrasion-resistance

Properties

Color	Brown
Density(Tolerance))	0.61(±0.01)
Hardness(Tolerance)	63(±3)
Tg(℃)	70
Tensile Strength(㎫)	-
Flexural Strength(㎫)	-

Applications

Interior / exterior design
Export Only

SW350-NOR

Characteristics

Hand lay-up resin for low-hardness type
Good NC machining speed
Improved anti-sagging resistance after hand lay-up
Good adhesion

Properties

Color	Brown, Orange
Density(Tolerance)	0.5(±0.01)
Hardness(Tolerance)	48(±2)
Tg(℃)	70
Tensile Strength(㎫)	14
Flexural Strength(㎫)	29

Applications

Interior / exterior design

Technical statements and recommendations refer to current standard of technique and are based on our own experiences. Further development and improvements are reserved. Due to the variety of processing possibilities own experiments are recommended to optimise